15 49.0138 8.38624 1 0 4000 1 https://eatgreenpoint.com 300 0
theme-sticky-logo-alt
theme-logo-alt

Paths in the country from paving slabs – Design of a beautiful courtyard (120+ Photos)

Paths in the country from paving slabs

Paving slabs for paths in the country are made from a variety of materials. Rubber, wood, stone, concrete – all have their own pros and cons, different types, manufacturing nuances and the specifics of styling, which you need to be aware of in order to be able to choose. The more knowledge, the easier it is to choose the material that is suitable for your summer cottage, making the area around the house not only useful, but also beautiful.

You also need to take into account the color, shape, size, styling methods, and other nuances with which you can turn design planning into a creative process and the search for beautiful combinations. But the easiest place to start is with materials..

Varieties of tiles

Before buying, it is important to take into account all the nuances of one or another type. Consider the most relevant tile options.

Plastic

Plastic is the cheapest material available in any field. It does not require complex processing, polymers are cheap for it, the performance properties are not too high as a result, but the price compensates for them.

Plastic is the cheapest material available

Plastic is the cheapest material available

There are different types:

Modular. It looks like a cellular lightweight tile of a bright color, which has special fasteners to tie the disparate modules into a single canvas. The material is pure plastic. The cost is very low. It looks cheap, in two or three years it becomes unusable, because it is unstable to temperature extremes, easily cracks from frost, and melts from heat. Has a specific advantage – it will not slip on it if it is not completely covered with ice.

Polymer sand. Looks like solid plastic tiles in a bright color, also with fasteners. The material is plastic mixed with sand in different proportions. The cost is small, but more expensive than modular. Looks cheap as well, as the plates remain plastic in appearance. Not suitable for an old wooden or stone house, it would be appropriate only for a house sheathed with siding. More resistant to temperature extremes and lasts longer. It has a specific drawback – it will slip very easily on it, since the surface remains smooth.

Decking. He is a terrace board. It looks like wooden parquet, it consists of two layers. Below is a modular tile with fasteners, on top there are several slats with gaps to allow moisture to pass through. The material is plastic mixed with wood chips in different proportions, most often one to four. It is quite expensive, looks respectable and beautiful, on a par with a natural wooden surface. This is the main plus – aesthetics in the absence of main disadvantages. wood.

Requires complex processing

Requires complex processing

In general, plastic tiles have a list of advantages:

  • Immunity to biological threats. Plastic does not rot, it cannot be damaged by parasites, mold or mildew will not start on it.
  • Moisture immunity. Even a decking, which has wood in its composition, calmly tolerates moisture, which is important for a summer cottage.
  • Immunity to mechanical damage. If you drop a heavy hammer on plastic, nothing will happen to it..
  • Ease of installation. Due to the fact that plastic has fasteners, it is easy to make a single canvas – it is assembled like a designer, even a person who is far from repair can cope with the work. If you need to disassemble the canvas, this will also be easy.
  • Price. For a summer residence, on which it is a pity to spend serious amounts, it can be a good solution, since it is cheaper than all other materials.
  • Brightness, wide range of colors. Plastic can be given any color or pattern.

Wide path to the house

Wide path to the house

But there are also disadvantages:

  • Instability to sudden changes in temperature, weather conditions. In the sun, the plastic burns out, cracks from the ice formed in the cracks, swells in the heat, can deform.
  • Immunity to aggressive chemicals. Household acid spilled on the coating will deform.
  • Unstable to heavy weight. A man can easily withstand, but a car is no longer there.
  • Fragility. Wears out much faster than rubber and concrete coatings.
  • Unaesthetic. In very rare cases, plastic tiles look good if they are not decking.

AdvicePlastic is a good solution if you don’t want to spend a lot of time and effort on styling. You can put it near outbuildings in the depths of the site, forgetting about the problem of paths for several years.

You can do it yourself

You can do it yourself

Rubber

For the manufacture of rubber tiles, secondary raw materials are used – used car tires. At the same time, its price is higher not only than that of plastic, but also than that of cheap clinker or concrete tiles..

Pros include:

  • Safety. Rubber is a soft material, falling on which it is difficult to get injured. If children or elderly people are resting at the dacha, rubber tracks will be very convenient for them..
  • Durability. Rubber wears out slowly, its service life is ten years.
  • Ease of installation and repair. Rubber has no fasteners, like plastic, but it cannot break, does not require special alignment, it can be easily replaced if some element of the finished track fails.

Soft material that can be hard to injure when dropped

Soft material that can be hard to injure when dropped

  • Resistant to temperature extremes and moisture. Rubber does not melt in the sun, does not crack in frost, completely insensitive to moisture. Does not rot.
  • Light weight and resistance to mechanical damage. Rubber cannot be broken, cannot be crushed, easily transported without thinking about accuracy. It does not crack, easily withstands the weight of not only a person, but also a machine.
  • UV and chemical resistant. Will not fade in the sun, will not be damaged if gasoline or household acid is spilled on the track.
  • Noise isolation. For tracks in the country, this factor is not so important, but if you are annoyed by loud noises, clatter of heels, noise of footsteps, choosing rubber is a good decision, since they are completely muffled.

Mounting method

Mounting method

But no material is perfect, rubber also has disadvantages:

  • Lack of ice resistance. In summer, rubber cannot be slipped even after rain, but in winter, when ice freezes on top, it is as easy to fall on it as on a slippery stone track.
  • Flammability. The rubber burns, even though it takes time to ignite. Gives off black suffocating smoke in the process..
  • Possible manufacturer’s bad faith. If the concrete slab is just brittle and obvious, then poorly made rubber can give off harmful substances. Therefore, you need to check its quality especially carefully..

AdviceRubber is a good option for stowing by the pool or in a place where children will play. But giving this material an aesthetics sufficient for a front yard requires considerable effort..

Natural stone

Natural stone is made simply – it is simply crushed and leveled so that beautiful shapes are obtained. Apply:

  • slate;
  • quartzite;
  • granite;
  • shungite.

For people who do not feel sorry for funds, there is an option to pave the paths with marble.

A natural stone

A natural stone

The stone has its advantages:

  • Durability. Natural stone practically does not wear out – this can be seen on the paving stones of old cities, which were laid many centuries ago. The paths from it are practically eternal, the maximum that can happen to them after a couple of decades of rain and snow – a beautiful even shape can become somewhat more free, grass will sprout between the plates.
  • Natural beauty. Natural stone is the most beautiful material that only wood can match. It is not painted like artificial materials, but the simplicity, naturalness of its colors itself looks good, especially if you pick them up with taste, so that they fit the garden and buildings.
  • Insensitive to moisture. Nothing will happen to the stone, even if it lies in the mud or in a puddle for six months.
  • Insensitivity to temperature changes, ultraviolet light, ice. The stone does not crack, does not fade, does not melt – nothing can happen to it.
  • Reliability. The stone tile cannot be broken, a person can walk on it, or a car can drive over it – it will withstand any weight.

Easy to manufacture

Easy to manufacture

But of course there are disadvantages:

  • Uniformity of colors. Yes, the natural colors of the stone are beautiful with their veins, with their different scales, with their variety of shades. But the brightness that the artificial material possesses, the abundance of colors with which you can lay out any drawing or pattern, is not characteristic of them..
  • Great weight. Stone is a heavy material. It needs to be loaded onto a vehicle, you need to unload it, you need to lay out paths for them – all this requires human labor, time, effort. In addition, not every foundation will withstand the stone..
  • High price. Natural stone is an expensive material, especially some of its varieties are usually the most beautiful. It can be much cheaper to use a different coating.
  • Immunity to some biological threats. Moss, fungus or mold can grow on the stone. By itself, this will not harm him, but it can change the overall appearance of the track for the worse..
  • Difficulties with the form. Hard types of stone are difficult to cut into tiles of the same size and shape, therefore they are often sold in a rather bizarre form, with many angles, with irregular bends. It will take an effort to make a decent path out of this chaos.
  • Icing. The stone does not have any protection from ice; even in summer, some of its varieties can slip and fall.

Versatile material

Versatile material

AdviceStone is a versatile material. It is better not to place it next to water sources, but otherwise it will look good in any area of ​​the site..

Clinker

Paving slabs that came from Holland, invented in the nineteenth century. It is made of clay with an admixture of dyes – first it is formed by pushing it through the hole under high pressure, then it is fired once. The resulting result is highly dense and has a whole list of advantages:

  • High durability. Clinker wears out almost as long and reluctantly as natural stone. You can walk on it for decades before the effect is visible..
  • Durability. It can serve almost as long as natural stone. Neither rain, nor wind, nor the scorching sun can harm her..
  • Resistance to temperature extremes, frost. No heat, no cold, no ice will affect the clinker, as well as biological threats.
  • A variety of colors, shapes. The clinker is made artificially, so it can be given any color and any shape, from banal monochromatic rectangles to fantasy polygons with a complex pattern.

Paths in the country from paving slabs - Design of a beautiful courtyard (120+ Photos) Paths in the country from paving slabs - Design of a beautiful courtyard (120+ Photos) Paths in the country from paving slabs - Design of a beautiful courtyard (120+ Photos)

Paths in the country from paving slabs - Design of a beautiful courtyard (120+ Photos) Paths in the country from paving slabs - Design of a beautiful courtyard (120+ Photos)

Clinker is a durable material that is not much inferior to natural stone in this..

Its disadvantages are specific:

  • Fragility. The disadvantage that natural stone is completely devoid of, clinker tiles, unfortunately, is fully inherent. If you drop something heavy on it or strike it, a crack will appear on the surface, due to which the entire element of the track will soon crack.
  • High price. Clinker is cheaper than natural stone, but more expensive than conventional tiles and, of course, much more expensive than rubber and plastic. It may be too expensive to lay out all the tracks on the site for them..

The clinker is available in different surface textures: on a smooth one it is easy to slip even in summer.

AdviceThe clinker is good for those places where aesthetics plays a big role. You can decorate the entire area with it, the main thing is to put only species with a rough surface on which you cannot slip near water sources.

Concrete

Concrete tiles are made from sand, cement, gravel and impurities that impart color and strength through three main technological processes:

  • Vibration casting. A cement mass is prepared, poured into special molds and installed on a table that vibrates – increased strength is given to the final product. After the formed result, right in the forms, they are left to mature for two days..
  • Vibrocompression. A mass is prepared, poured into molds and for a few seconds sent under a vibrating press, which at the same time gives the upper surface a pattern. After the result is sent to cool and is considered ready.
  • Hyper pressing. A mass is prepared, poured into molds and placed on a press so that strength is transferred to it with pressure. After it cools down and is considered ready.

Concrete option

Concrete option

The cast version is considered somewhat more fragile, but there is not much difference between the results of technological processes..

They have the same advantages:

  • Variability. Many colors, many shapes, patterns on the surface – concrete tiles are perhaps the most diverse and can even be made to order.
  • Low price. In terms of stone and clinker, concrete is starting to look like a cheap solution, although it certainly costs more than rubber and plastic..
  • Stability. Does not suffer from temperature extremes, is not subject to biological threats, does not fade in the sun, does not crack under ice, wears out for a long time.

There are, of course, disadvantages:

  • Relative fragility. Concrete begins to crack and crumble earlier than clinker and natural stone – these are its characteristics. This happens especially quickly if the product was produced in one region, and is used in another..
  • Installation difficulties. If a mistake was made during the installation process, it will be difficult to fix it and you will have to start from the very beginning..

AdviceConcrete is a versatile material that is suitable for any part of the site.

Made from sand, cement, gravel and impurities

Made from sand, cement, gravel and impurities

Planning and design

If you can choose the material, guided by the general idea of ​​the site and by tastes, then you will not be able to do this with the rest of the characteristics. The tile design should match the design of everything else, it should fit into the overall concept.

To make this possible, you need to approach planning consistently:

  • Draw up a site plan. You need to apply a house, outbuildings, the largest flower beds and beds to it – everything that has at least something to do with landscape.
  • Make a plan for future tracks. The paths should lead from the house to the outbuildings and to the gates, and they should go as the inhabitants of the house walk, and not as it seems beautiful on the plan. Bend around large obstacles, take into account “little things” like hanging over the place where the path should pass, branches.
  • Assess prospects. According to the plan, you can estimate what the tile should be so that everyone is comfortable. If there is a well or a pool on the site, you need to take a rough texture and material that is not afraid of moisture. If there is weak soil on the site, which easily crumbles and does not hold the weights well, it is better to forget about natural stone. Also, estimate the budget of the enterprise and whether cars will drive along the paths, think about how much the maximum temperature difference is. How much heat and how cold will the track have to endure? How long will they walk on it??

Think over the repair in advance

Think over the repair in advance

The abrasion rate depends on how much they walk.. From the maximum temperatures and differences – the required frost resistance. If there is a car driving on the paths, the tiles should be thicker. And it depends on the budget how expensive it will be.

Having decided what the technical characteristics should be, you can move on to more pleasant and complex matters: to design.

You need to take into account:

  • In what style is it made House? If it is sheathed with plastic panels, expensive natural tracks stone will not approach him. Conversely, if it is made of brick, it is not impressive to surround it with plastic..
  • Do they grow on the site flowers, if yes, what? Colour tracks should match, at least approximately, with their color.
  • Do you have any drawing ideas or should the tiles be solid? If there are ideas, you need to carefully sketch them (it is good if there are more than one ideas so that there is plenty to choose from), paint over and evaluate the result.
  • Will you lay the tiles yourself or hire workers? If you plan to lay it yourself, it is better to choose simpler patterns for a start and not take a natural stone, which is heavy for laying..

The path should match the style of the house

The path should match the style of the house

AdviceAccording to the norms, the footpaths should be no more than seventy-five centimeters, so that an adult can safely walk along them.

When the plan is ready and the final styling pattern is selected, you can take on the selection.

It will be interesting for you:

Modern landscape design of the courtyard of a private house (160+ Photos). How to beautifully equip and decorate with your own hands

The nuances of choosing tiles

First you need to navigate the exact characteristics. Size, shape, frost resistance, wear resistance – all this you should know before you go to the store. And already directly in the store, you need to imagine how a good tile should look like, how it differs from a low-quality tile and what documents to ask the seller.

Characteristics

Each tile has a set of characteristics to consider when purchasing. The first is size. Exist:

  • Petite. Such a good thing is that you can lay out any pattern or pattern from it on a narrow summer cottage path, and also that you do not have to think too much about the base and whether it will withstand. But there is also a big minus – more work will be required. After all, laying out three large tiles in a row is much easier than forming a row of ten small ones..
  • Average. A universal option. The drawing will not work, but here’s a beautiful complex pattern – quite. It is not necessary to think about the reason yet, difficulties with laying should not arise either. Ten by ten centimeters is an example of a good medium tile.
  • Big. The patterns are only the simplest, and you will have to think about the base – if it is not strong and even enough, the tiles may sag on one side or crack. But if you have the strength and time to prepare, and you prefer the monochromatic beauty of the geometric order to complex patterns, this is a good choice..

Medium product size - universal option

Medium product size – universal option

After the size, you should decide what shape should be:

  • Square. For square tiles, simple patterns are suitable – they can be laid out in a checkerboard pattern or create a semblance of a brick pattern. It is best if they are colorful and this will make them look more fun..
  • Rectangular. You can also lay out a checkerboard pattern, but not so effectively, but a brick pattern, “herringbone”, laying in waves will look. You can create a drawing with different colors.
  • Wild stone. This is the name for tiles made of natural stone, which are not made in shape, but according to how the stone was split. Patterns with them will not work, and in order to form a path, you will have to make an effort. To make the work easier, you can first do it on paper..
  • Complex shapes. Clover, hexagons, circles, stars – they are all a pattern in themselves. It is enough just to lay them according to the drawing..

Very small tiles can be used in order to make a meaningful drawing, regardless of the shape – a stained glass window is made according to the same principle. Also, if you want to do something specific, fantasy, invented by yourself, for which there are no necessary forms, you can always contact the manufacturer and place an order.

Well-kept plot near the house

Well-kept plot near the house

It will cost twice as much as a regular product – or even five, depending on the complexity of the form..

Then you should choose the thickness:

  • Two to four centimeters. Used for footpaths. If you are going to lay paths in the country exclusively in order to walk on them, this option suits you.
  • Six to eight centimeters. Withstands very intensively moving people or a car. I hardly need it at the dacha.
  • Eight to ten. Withstands the weight of any cars, it is usually used in factories, gas stations and in private yards where the car will be parked.

For a summer residence, a thick tile is definitely not needed – and this is good, because the thicker it is, the more expensive.

Then you need to choose purely technical parameters. The abrasion resistance is indicated on the packaging, the higher it is, the more reliable the track that you get will be. Frost resistance is indicated next to – the value shows how many freeze-thaw cycles the tile can endure.

Original solution

Original solution

The best options have an indicator of more than two hundred and should be guided by them..

The last parameter to pay attention to is color. It depends on it how impressive the resulting track will look..

There are many options:

  • White. One of the most spectacular colors that will look good at night, in the dark. It is unlikely that you will be able to get lost along such paths, they will look bright and will suit most styles. The only negative is that the stones will have to be looked after, otherwise they will quickly become dusty, dirty and turn gray.
  • Black. It is also a spectacular option that will go well with the austere house made in dark colors. Dirt is invisible on such a tile, but in the dark it will be easy to lose track.
  • Contrasting combinations. Contrasts are best for patterns – combine black with white, purple with orange, and blue with yellow that’s a good idea. Such paths will be clearly visible, they will look bright, attract attention..
  • Shades-combinations. The material allows you to take one bright color and dilute it with a shade – light or dark. This option looks simple, but tasteful..
  • Natural colors. The stone is beautiful in itself, but you can choose the tiles made for it. If it imitates well the veins, shades of natural stone, the paths will look natural, neat and beautiful at the same time. You can also choose tiles that have not been fired – they will have a pleasant dark orange or dark-Brown Colour.

Choose the right color

Choose the right color

Having decided for yourself what the material should be in terms of all characteristics, you can go to the store and choose a specific batch there..

What to look for when buying?

The tile must not only fit the design, it must also meet quality standards. Determining if they are going to deceive you is simple enough. Necessary:

  • Ask the seller for documentation. Any consignment of goods must be accompanied by a certificate of conformity, which will confirm that it has been manufactured in accordance with state standards, as well as a test report, which contains all the information about wear resistance, frost resistance, and other qualities of the product. If the seller is busy trying to change the subject, there is a high probability that something is wrong with the product – it is better to go to other people.
  • Check random tiles from the batch. Even if the product that you are offered is bad, the top, visible, layer in the package will be done well so that you don’t guess anything. The request to get the tiles from the middle is normal, especially if you are ready to buy this particular package later..

Paths in the country from paving slabs - Design of a beautiful courtyard (120+ Photos) Paths in the country from paving slabs - Design of a beautiful courtyard (120+ Photos) Paths in the country from paving slabs - Design of a beautiful courtyard (120+ Photos)

Paths in the country from paving slabs - Design of a beautiful courtyard (120+ Photos) Paths in the country from paving slabs - Design of a beautiful courtyard (120+ Photos)

  • Check for flaws. Chips, cracks, crumbling edges – all this indicates not only low quality, but also that the goods were transported without the slightest accuracy. He may come to you in the same state.
  • Check for dryness. To do this, taking out two tiles, gently knock one against the other. If the sound is dull, this means that the product has not dried out well and will not be durable. Minimal damage is enough to crumble.
  • Check the form. The tiles must be the same (unless, of course, we are talking about natural stone with bizarre shapes), otherwise it will be difficult to fit into a pattern.
  • Buy a high or medium price segment. A cheap product – cheap relative to another of the same – usually of poor quality, will not do you any good.

Paths in the country from paving slabs - Design of a beautiful courtyard (120+ Photos) Paths in the country from paving slabs - Design of a beautiful courtyard (120+ Photos) Paths in the country from paving slabs - Design of a beautiful courtyard (120+ Photos)

Paths in the country from paving slabs - Design of a beautiful courtyard (120+ Photos) Paths in the country from paving slabs - Design of a beautiful courtyard (120+ Photos)

When the tile is selected, all that remains is to pay the seller, take the documents, and arrange delivery. After – it’s up to the little. Based on the plan, assemble tracks on site.

Quality tiles will delight you for years to come. If you have chosen the right size, shape, material, color, if you have not miscalculated with frost resistance, wear resistance – the tracks will last for decades.

Quality tiles will delight you for many years

Quality tiles will delight you for many years

Previous Post
Kenmerken Ladekast in wit: 200+ (foto) opties (glanzend, met lades, zonder handgrepen)
Next Post
Grillområde i landet: Hvordan udstyres et websted med et lysthus, grill og grill? (180 + fotos)